Following six years of development, British loudspeaker manufacturer Funktion-One has launched Vero – the new, large format touring sound system that promises to re-define audio and operational performance expectations and deliver the next level of tour sound.

Vero began life when Tony Andrews considered the possibility of designing a sound system that configures in a linear array. Having spoken of his concerns about the intrinsic sound issues of line-array systems for many years, this may have appeared to some as an unusual step. While Andrews recognised the time and manpower benefits of rigging a vertical array, he definitely wasn’t prepared to compromise the audio standards that he and John Newsham have lived and breathed for over 40 years.

Andrews and Newsham set out on a journey, which has seen many twists and turns along the way. The result, quite frankly, is ground-breaking.

V90 angleVero is a complete system, with each element specified or designed for the highest possible performance. The system includes speakers, amplifiers, cabling, rigging, transport dollies, weatherproof covers and software. “One of the reasons it’s taken six years to develop is the amount of design work and detail that goes into originating a complete system,” explains Andrews. “Not just loudspeakers, but the flying system which is patent pending, the cabling, the amplifiers and the shock mounted racks. We’ve developed Projection – Vero’s propriety predictive software, which is very intuitive and easy to use. What you see in the software is what you get in the field. Every element of the system has to be exactly right.”

Vero has been in beta testing for the last three years, during which every part of the system has been thoroughly refined. To give one example of the attention to detail: three types of dolly wheel were tried, tested and rejected before the fourth qualified as being the correct option for the challenges of tour, festival and big arena gigs. Extremely high design standards run throughout, meaning the system is very easy to use. While this is of imperative importance, it is Vero’s sound that truly sets it apart.

Andrews says: “When you’re listening to it, the presentation of the sound stage is absolutely phenomenal. You can actually go outside the typical two hang arrangement and you’re still aware of the stereo image.”

Newsham adds: “We’ve always tried to make a speaker work correctly without the need for electronics and one of the reasons the development has been as long as it has is because we’ve been chasing that ideal.”

Andrews continues: “We’ve had to answer the challenge of getting very different componentry to work within the same box.“

This determination for a natural sound, free of quality-diminishing processing, led Vero’s designers to something called Geometric Energy Summation (GES). In short, this is the natural geometry of the waveguides and their relationship with each other within the array combining for a coherent addition of sound.

The design of the drivers and the geometry of both the waveguides and flying system have been optimised to ensure sonic integrity. Preservation of the original audio signal through a system’s component chain is a fundamental requirement for great sound. With Vero, spectral balance, directivity and level control are achieved by natural means so that transient and harmonic information remain intact.

Vero presents a very spacious and realistic sound stage, meaning artists, engineers and concertgoers can enjoy unprecedented dynamic range, dimension and fidelity.

Vero’s designers have achieved amazingly coherent summation of audio energy from finely angled adjacent enclosures for high intensity projection to the far field. Enclosures can also be arrayed at greater angles to extend vertical coverage for the near field. This enables accurate physical control of sound density from a Vero array.

(GES) enables sound density to be easily and accurately tailored whilst preserving a uniquely detailed sonic picture.

Cover on lightThe Vero speaker range features six highly efficient, low distortion horn-loaded loudspeakers – the V60 mid-high, V90 mid-high and V315 mid-bass with a choice of V221, V124 or V132 bass. The V60s, V90s and V315s all have identical dimensions, enabling them to be flown in the same vertical array. The ground stacked V221, V124 or V132 bass enclosures offer a choice of size and low frequency extension.

Vero is powered by Lab.gruppen PLM 20K44 amplifiers, featuring bulletproof reliability, tremendous power from a compact package, onboard processing and the sonically superior Dante networking for signal distribution. Three PLM 20K44 amplifiers and mains distro are fully shock mounted in an innovative, compact rack, complete with sliding doors that conveniently stow in the roof of the rack.

Vero’s patent pending Lambda flying system is designed for speed, safety and ease of use. It allows Vero arrays to be deployed accurately and efficiently. All rigging settings can be calculated using Vero’s Projection software. Unlike most other flown arrays, Vero’s inter-cabinet splay angles can be adjusted with the system in suspension.

Vero’s unique flying system ensures absolute driver alignment and allows for angle adjustment under load, meaning arrays are transported and flown in a straight line before being tensioned to exact angle settings. Load ins and load outs have never been more straightforward.

Vero’s Projection design and prediction software allows Vero users to optimise array designs for smooth audience coverage in any venue. Projection provides venue plan, cross-section and 3D screens. Features include a user-friendly interface, a measurement tool calibrated in distance and time at the speed of sound, and colour coding to differentiate between the different types of enclosure.

Tony Andrews concludes: “Good audio is an art. It isn’t plant hire. The part it plays in people’s enjoyment of music is severely underestimated. The overall result with Vero is industry leading coherence and accuracy, resulting in a big sound of dimension and intimacy. Vero presents a very spacious and realistic sound stage, meaning that artists, engineers and concertgoers can enjoy unprecedented dynamic range and fidelity, which is how audio should be.”

Find out more about Vero here.